Airbrush Skin Care Kit (BDA 68200)

Airbrush skin care kit BDA68200

Main Features:
The gun diameter is 0.2~0.6mm.
Can be widely applicate in Resin Technology, Art Painting, Beauty makeup,Nail painting, Airbrush Tattoos, Art craftwork,Model making, Cake decorating, Ceramic painting, commercial art, graphics, photos design and some other industry.

Compressor 60800 parameters:
Power supply:DC 12V
Maximum air flow:10L/min
Output voltage:12V
Output Current:0.8A
Max Pressure:25PSI / 1.8BAR
Service life:Can work continuously
Pressure adjustment:Stepless adjustment knob
Dimensions:106 * 65 * 118mm
Weight:540g

Airbrush gun61002 Parameters:
Feed Type:Gravity                          working Pressure:15-50PSI
Nozzle Dia.:0.2-0.6mm                 Control:Push-button
Body Length:155mm                    Cup Capacity:20cc/40cc

Compressor Operation
1.Connect the air pipe(already fitted with a quick plug) to the outlet of the air pipe.Make sure that the quick plug is firmly connected to the air pipe without any leakage.
2 .Connect the power supply and press the POWER button.The LED will light up, indicating that the airbrush is in working mode.
3 .Rotate the PRESSURE knob.Turning the PRESSURE knob clockwise will increase the output air pressure.The knob will stop at the MAX position, where the output air pressure reaches maximum.Turning the knob counterclockwise to decrease the output.

Airbrush Gun Maintenance:
Intermediate cleaning:
Spray out the colors, dissolve the residue with water or suitable cleaning agent.
Then use brushes or cotton buds to clean, spraying water or cleaning agent out subsequent to this.

Thorough cleaning (prior to longer working breaks):
A.Terminate the compressor.Unscrew the gun tail and needle securing nut;
B.Pull out the needle, clean it with a cloth and cleaning agent.Check the needle tip for deformation;
C.Unscrew the needle cap and clean with a cotton bud;
D.Remove the nozzle and push any color residue carefully out of the interior with a fine brush .Check the nozzle and seal for cracks or deformation;
E.Insert the nozzle into the airbrush head and screw into position.Press the lever down and insert the needle carefully up to the stop.Screw the needle securing nut and gun tail into position.

Further maintenance instructions:
Never immerse the entire instrument in solvent.
Keep the needle tip and nozzle free of oil and grease, as this can influence the spraying characteristics.
The needle, nozzle and seals are components subject to wear, should be replaced when necessary.