high end baby incubator AG-IIR002A high end baby incubator
Incubators premature baby Specification: 1. Microprocessor based servo controlled temperature system 2. Air temperature, skin temperature, humidity, timer and heat power separately displayed by LED 3. Alarms functions: Power failure; Over temperature; Temperature deviation; Temperature sensor failure; Fan failure; 4. Silence/reset button for alarms 5. Integral timer to record therapy time 6. Humidity is adjustable continuously 7. >37 °C temperature setting 8. A keypad lock prevent inadvertent changes the setting 9. Trough for pulling and pushing, which is convenient to add water and wash 10. Fan with low noise and long life-span 11. Temperature deviation and over temperature could be amended in front panel directly 12. A second thermal cut-off function for more safety 13. Skin temperature sensor failure protect function avoid over temperature 14. The infant bed inclination angle is adjustable 15. Six operating windows, two sides operating windows can be swiveled 16. Heater is electrically cut-out if air temperature inside incubator exceed 40 °C 17. Cabinet with three drawers, silence castors Standard configuration: Main body(including the transparent hood, control system, infant bed, water trough), skin temperature sensor, I.V.pole,tray ,mattress, cabinet, castors Technical data: 1. Power supply: AC 110/220V 60/50Hz 2. Power input: ≤ 420VA 3.Operating conditions: Environment temperature: 20~30°C Environment relative humidity: 30%~75%RH Environment air velocity of flow: <0.3m/s 6. Air Temperature control range: 25~38°C 7. Skin temperature control range: 32~38.5°C 8. Skin temperature sensor accuracy: +/-0.3°C 9. Temperature fluctuation: +0.5°C 10. Uniformity of mattress temperature: ≤ 0.8°C 11. Warm-up time: ≤ 45min 12. Internal noise level: ≤ 55dB 13. Humidity display range: 10%-95%RH 14. Humidity accuracy: ≤ 10%RH 15. Infant bed tilt angle: +10degree 16. Mattress size: 67cm(L)X 54cm(W) 17. Trough capacity: 1200ml 18. Air filter: 0.5um Similar products:
Standard export packing: