Actiflo lamella clarifier used in wastewater pretreatment

Specifications 1. micro bubble generation.

2. Sedimentation technology.

3. Counter current mechanism.

4. Scum circulation and flocculation

 Actiflo lamella clarifier used in wastewater pretreatment   Principle of LST   The LST Settler is designed to remove particles from liquids. Its theory is put forward on the basis of Shallow tank, which tells the settling efficiency of sedimentation tank is only related to surface area. On LST the settling area is the total area of the inclined plates projected on a horizontal surface.This reduces the footprint of lamella settlers by about 90% as compared to conventional clarifiers and the efficiency of the sedimentation process is multiple increased.     Use of LST1-040  Suitable for all applications where sedimentation is the preferred technology,like:
    Electronic & electroplating wastewater,
    Paper & pulp wastewater,
    Industrial process water,
    Treatment before filtration,
    Filtrate and backwash water, 
    River water clarification,
    Sludge thickening, etc...     Features of LST1-040    1. Design treatment capacity: 40 m3/h.   2. High-rate clarifier for high SS water (grit, clay, lime & mental particals).    3. Conical sludge hopper without sludge scraper.   4. High capacity on a minimal buliding area.
  5. Indoor or outdoor layout (environmental temperature should be over 0°C).    6. Lamella plates creats a good condition for laminar flow and reachs a better sedimentaion result.    7. Compact design minimizes hydraulic disturbances caused by wind or temperature changes. 
  8. Apply to automatic & continious operation.
  9. Design life: Carbon steel material: >10years;
                      Stainless steel material: >20years.   Advantages of LST1-040    1. Less floor space: extend the lamella plates to 1.5m, which is designed to maximise settling efficiency with minimal footprint, reducing the footprint to as little as 10% of a traditional settling tank.
  2. Equal flow distribution: LST system adopts side of reverse flow and collects the clean water directly at the top. This method of feed control guarantees equal distribution to all lamella chambers.
  3. Excellent condition for laminar flow: no blind angle, no short circuiting or surface turbulence.
  4. No blockage and adherence: plates are supported and inclined at the optimum angle of 60° and the space distance is 8~10cm. Backwash pipes are equipped under the lamellar packs.
  5. Rugged and durable: the material of lamella plates is UPVC with a thickness of 6mm, which placed in packs, highly strengthened and easy to washing and maintenance.
  6. Positive sludge discharge: packaged settling unit with a conical sludge hopper, increaseing sludge thicking capacity, greater sludge storge and surge capacity.
  7. Easy to transport: total height is less than 3m, can be shipped by standard container to discharging port.   Specifications of LST1-040 >

No	Category	Description
1	Tank	Q235B Tank
		Q235B Reinforcement