AAC cutting machine, AAC equipment,fly ash AAC plant cutting machine

Specifications 50000-400000m3 aac plant

1.export to russia,india,indonesia,iran,etc.

2.Output Capacity: 50,000 m3-400,000 m3/yr

AAC brick production line/Cutting machine for making AAC brick/Cutting machine from manufacturer Shanghai Minggong/Cutting machine for ground cutting or air cutting   Working principle   Turning over sling turns the mould with 90 degree and demoulds it,the cake together with the side board of the mould are placed on the cutting cart. Started by the motor, the cutting cart moves slowly through the functioning vertical cutting device to complete the vertical cutting. Then it moves to the middle of cutting device and stops there, the cross cutting device is started at this moment. The cutting frame drops vertically, then after cutting the cake horizontally. Cut the cakes from the horizontal side it will return to its original position.   Main technical parameters:  

No.	Name	Unit	Index	Remarks
1	capacity	10000cbm/year	10-30	Annual output
2	Size of the cake	M	4-6×1.2×0.6	Net
3	Cutting cycle	mm	5/10	Vertical cutting/ cross cutting
4	Cutting precision	mm	±3±1.5±1.5	Length, width, height
5	Production cycle	Mould/min	1/4.5-6
6	Quantity of the master cutting machine	t	18	Vertical cutting/ cross cutting
7	Installed capacity of master cutting machine	kw	12.9-20.5	Including  hydraulic station

      AAC brick making plant: 1. Production Line of AAC block making machine/ aac plant/aac production line AAC Aerated concrete is the lightweight artificial stone, adopting the calcareous material and the siliceous material as components, forming the porous structures by the way of chemical gas generation, and obtaining the intensity after autoclaved curing. The calcareous material is mainly lime and cement, the siliceous material generally is industrial waste in China, such as fly-ash, tailings etc, or quartz sand.   annually 50000 m3 flyash aac production line/50000 m3 flyash aac plant   2. AAC block making machine Main Process Flow:
1. Raw material: Store the fly-ash (tailings etc), lime and gypsum after milling to the needed fineness (200 mesh)
2. Mixing the fly-ash, cement, lime, gypsum and water in the pot after batching.
3. Promote the slurry temperature to 40-50 degree by steam, and mill with aluminum powder for 1min.
4. Pour the slurry into the mould, and still in the curing room for frothing in 2-2.5h.
5. Cut it in to needed size by the cutter after the slurry approach the cutting intensity, and place the block on the trolley.
6. Autoclaved curing after the trolley enter into the autoclave (vacuum, rise the pressure, keep the pressure, reduce the pressure),keeping the constant pressure 1.2MPa. The whole process needs about 12h.
7. The products out of the autoclave are placed in a stack. We can recycle the scrap and the waste water from the whole production.      3. Raw material for AAC block making machine/ aac plant/aac production line   AAC Aerated concrete is the lightweight artificial stone, adopting the calcareous material and the siliceous material as components, forming the porous structures by the way of chemical gas generation, and obtaining the intensity after autoclaved curing. The calcareous material is mainly lime and cement, the siliceous material generally is industrial waste in China, such as fly-ash, tailings etc, or quartz sand.   1) Storage and Process of Raw materials of AAC block making machine 
 (1)fly ash(sand)and gypsum
 During process, proportioned fly ash(sand)and gypsum are put into Slurrying tank and made into mixing slurry. Then it is pumped into the slurry storage tank by slurry pump as standby. (2)Quick lime 
The bulk quick lime is conveyed to the lime storage by bucket elevator after being crushed by swing jaw crusher(Or: The bulk quick lime is conveyed to ball mill by belt conveyed after being crushed by swing jaw crusher),then the lime powder after being grinded fine by ball mill is conveyed to the lime powder storage in ingredient building as standby. (3)Cement 
The cement adopts bulk cement(ordinary portland cement (325#) or portland cement (425t)),and it is pumped into the cement powder storage in ingredient building as standby (4) Aluminum powder 
Aluminum power is poured into aluminum mixing machine to mix into 5% slurry as standby after being metered by workers 4. Dosing & mixing & pouring of AAC 
The metered slurry pours into the pouring & mixing machine according to order, and at same time, the dumping device of electronic scale discharges the metered lime and cement powder to pouring and mixing machine. Then the slurry in Slurrying tank after being mixed will be poured into mold box below the Slurrying tank. 5. Cutting &marshalling of AAC 
After the base reaches to certain hardness for cutting through static stop curing, the overturning crane on cutting and overturning vehicle (10t) hoists and overturns the base to the cutting dolly and demoulds, which overturns the base 90 degrees. Cutting dolly moves to finish transverse and vertical cutting.
The cut base with side plate will be conveyed by marshalling crane to the steam curing dolly and then pulled into autoclaves to steam curing.   6. Steam curing & finished product of AAC   The steam curing time in constant pressure is 4 to 10 hours with the steam pressure 1.3Mpa and temperature around 190°C. Finished products after steam curing are dragged out from autoclave by slow moving hoist, and be lifted by crane to the transport vehicles   7. Retuning, assembling and oiling on Base (side) plate
After conveying the finished products, the bottom (and side) plate on steam curing dolly with the dolly are lifted to lane for returning.    annually 50000 m3 flyash aac production line/50000 m3 flyash aac plant   About us Shanghai Minggong Heavy Equipment Co. Ltd. is founded in 1956 , Our products, solutions and services are dedicated to helping customers reduce investment costs, reduce energy consumption, reduce environmental pollution, maximize benefits and achieve succeed. Looking back and ahead, we are confident to provide you with better products and services. Our goal is to provide safe, reliable, efficient, clean equipment and solutions for customers around the world. We clearly recognize that providing efficient production equipment to our customers and the entire community is a very meaningful thing, this is not only our responsibility, but also reflects our company's core values. Whether it is market research, product development, or service, we take "safe, professional and efficient" as our basic concept.