AAC Block Plant , Automatic AAC Block Making Plant , Automatic AAC Light Weight Block Plant

Specifications AAC Block Making Plant

1. Germany Ytong & Hess Technology

2. Higher Quality Equipments

3. Super Plant Designing


          Autoclave aerated concrete ploduction line(aac plant)        

Process: 1. First,dose and match measured raw materials 2. After distributing,feed raw material into pouring mixer to make slurry 3. Through thoroughly mixing,the slurry is poured to mould 4. After pre-curing under a certain temperture and time,the block would reach a  certain hardness prepare for cutting 5. Tilting hoister would turn over 90 degree of mould 6. Then open the mould and separate it from block,and take the block woth side plate ti cutting cart 7. The blocks then be cut through the cutter firstly of two vertical sides of block 8. Secondly the horizontal cutting 9.  Finally the vertical cutting 10. After cutting,the block is hanged to trolly with side plate by semi-finished product hoister 11. Organizing the cut blocks and put them into autoclave 12. Hardending the blocks under certain temperture and pressure 13. Take finished products out of autoclave 14. The finished product hoister take the finished product to stock shield 15. Packed for loading 16. The side plate return back by side plate roller 17. Side plate would be organized with open mould 18. Clean the mould and preparing for next pouring 19. Steel bars processing line for slab production

        Sievo AAC Block Making Plant Advantages:   1. Applied Germany Ytong & Hess Group technology and combined with China innovation;   2. Cutting machine adopt frame shaking and cutting, which is most reliable designing;   3. Turning table realizing six-sides peeling successfully for aac block cake;   4. Fully automatic & Semi automatic designing;   5. Siemens Brand Motor & PLC Control;   6. Japan YUKEN hydraulic system, Germany Schneider switch;   7. China AAC Association Group best quality and scientific designing;   8. Equipments lifetime maintaining service.       Sievo AAC Block Making Plant Reference:          Introduction of AAC Block Making Plant:   Autoclaved Aerated Concrete (AAC) Block, also called Light Block, used siliceous (fly ash, sand, slag) and calcareous (lime & cement) as the main raw materials, which through the process of batching, pouring, precuring, cutting, autoclaving, separating and packing to make into the final products. It is new type & environmental construction material and widely used for industry and civil building construction. AAC Block is the most mature technology of production and application in the worldwide nowadays.       Advantages & Features of AAC Block Making Plant:   1. Light Weight: 300~800kg/m3   2. High Intensity: 3.5~10.0Mpa   3. Good Thermal Insulation Property: 0.1~0.20W/(m · k)   4. Keeping Temperature, Heat Resistant, Fireproof   5. Good Sound Insulation   6. Earthquake Proof   7. Good Machinability   8. Conveniently Mechanized Construction     Sievo Offering AAC Block Making Plant with Following Annual Capacity:   50,000 m3AAC Block Plant; 60,000 m3 AAC Block Plant;   100,000 m3AAC Block Plant; 150,000 m3 AAC Block Plant;   200,000 m3AAC Block Plant; 250,000 m3 AAC Block Plant;   300,000 m3AAC Block Plant; 350,000 m3 AAC Block Plant;   400,000 m3AAC Block Plant; 450,000 m3 AAC Block Plant;