1 / 2
Product description
85 - 264V AC 120 - 370VDC 36W Switching Mode Dual Output Power Supplies 11ENV50204, EN5502
Description:
SPECIFICATION |
||||||
MODEL |
ESH-35W-5 |
ESH-35W-12 |
ESH-35W-35 |
ESH-35W-24 |
ESH-35W-48 |
|
OUTPUT |
DC VOLTAGE |
5V |
12V |
35 |
24V |
48V |
RATED CURRENT |
7A |
3A |
2.4A |
1.5A |
0.8A |
|
CURRENTRANGE |
0-7A |
0-3A |
0-2.4A |
0-1.5A |
0-0.8A |
|
RATED POWER |
35W |
36W |
36W |
36W |
38.4W |
|
RIPPLE & NOISE (max.) Note.2 |
80mVp-p |
120mVp-p |
150mVp-p |
150mVp-p |
240mVp-p |
|
VOLTAGEADJ. RANGE |
4.75 ~ 5.5V |
10.8 ~ 13.2V |
13.5 ~ 16.5V |
21.6 ~ 26.4V |
43.2 ~ 52.8V |
|
VOLTAGE TOLERANCE Note.3 |
+/-2% |
+/-1% |
+/-1% |
+/-1% |
+/-1% |
|
LINE REGULATION |
+/-1.5% |
+/-0.5% |
+/-0.5% |
+/-0.5% |
+/-0.5% |
|
LOAD REGULATION |
+/-1.5% |
+/-0.5% |
+/-0.5% |
+/-0.5% |
+/-0.5% |
|
SETUP, RISE TIME |
1000ms, 30ms/230VAC 1000ms, 30ms/135VAC at full load |
|||||
HOLD UP TIME |
50ms/230VAC 10ms/115VACat full load |
|||||
INPUT |
VOLTAGERANGE |
85 ~ 264VAC 120 ~ 370VDC |
||||
FREQUENCYRANGE |
47-63Hz |
|||||
EFFICIENCY (Typ.) |
78% 75% |
81% |
83% |
85% 75% 75% |
86% |
|
AC CURRENT |
0.75A/135AC 0.5A/230VAC |
|||||
INRUSH CURRENT (max.) |
COLD START 45A |
|||||
LEAKAGE CURRENT |
<2mA / 240VAC |
|||||
PROTECTION |
OVER LOAD |
105-350% rated output power |
||||
Protection type : Constant current limiting, recovers automatically after fault condition is removed |
||||||
OVER VOLTAGE |
5.75 ~ 6.75V |
13.8 ~ 16.2V |
17.35 ~ 20.35V |
27.6 ~ 32.4V |
55.2 ~ 64.8V |
|
Protection type :Shut down O/P voltage, re-power on to recover |
||||||
OVER TEMPERATURE |
U1 Tj 140 typically (U1) detect on main control IC |
|||||
Protection type : Shut down O/P voltage, recovers automatically after temperature goes down |
||||||
ENVIRONMENT |
WORKING TEMP. |
-20-+50℃(Refer to output load derating curve) |
||||
WORKING HUMIDITY |
20-90% RH |
|||||
STORAGETEMP., MIDITY |
-20-+85℃, 10-95% RH |
|||||
TEMP. COEFFICIENT |
+/-0.03%/(0-50℃) |
|||||
VIBRATION |
10-50HZ |
|||||
SAFETY &EMC |
SAFETY STANDARDS |
UL60950-1approved |
||||
WITHSTAND VOLTAGE |
I/P-O/P:3KV I/P-FG:1.5KV O/P-FG:0.5KV AC |
|||||
ISOLATION RESISTANCE |
I/P-OP, IP/FG, OP/FG:100M OHMS/500VDC/35C/70%RH |
|||||
EMICONDUCTION& DIATION |
Design refer toEN55022(CISPR22) |
|||||
EMSIMMUNITY |
Design refer toEN61000-4-2, 3, 4, 6, 8, 11ENV50204, EN55024. |
|||||
OTHERS |
MTBF |
411.47Khrs min. MIL-HDBK-217F(35℃) |
||||
DIMENSION |
99*97*36mm (L*W*H) |
|||||
PACKING |
0.36Kg; 45pcs/17.2Kg/0.93CUFT |
|||||
NOTE |
1:All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. |
|||||
2:Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. |
||||||
3:Tolerance : includes set up tolerance, line regulation and load regulation. |
||||||
4:Line regulation is measured from low line to high line at rated load. |
||||||
5:Load regulation is measured from 0% to 100% rated load. |
||||||
6:The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. |
Competitive Advantage:
Send your inquiry to this supplier