1 / 3
Model No. : | FE-588 |
---|---|
Brand Name : | FREMCO |
Certification : | ISO9001 |
Jining, Shandong, China
Product description
8 Ton Remote Truck Crane Solutions
Mobile crane included truck-mounted crane, all-terrain crane, crawler crane, marine crane. Truck-mounted crane also named truck crane, wheel crane truck, mounted truck with crane. According the capacity, it divided into 16 tons crane, 12 tons crane, 10 tons crane, 8 tons crane and 6 tons crane. FREMCO is a crane factory, custom-made crane is accepted, welcome to visit our company !
This Truck Crane is with hydruclic system with T-KING chassis, work with electric hydraulic.the lifting load :3 ton, 5 ton, 6 ton,8 ton,10 ton,12 ton ,14 ton ,16 ton.
The Chassis can make customized,such as OEM,also can match brand such as: T-King , FOTON, DONGFENG.
Truck crane Solution Operation specification:
1. The crane driver must be professional and technical trained, examination qualified and getting
the certificate can operate independently.
2. The driver should be familiar with mechanical principle of mobile crane, maintenance rules,
safety operation procedures, and strictly carry out according to regulations. It is forbidden to drink or body has not indications for operation.
3. Before use people should check whether the job site is flat solid in detail, leg whether firm,
operating handle, brake and other operating device is sensitive and reliable, to ensure working
without anything abnormal.
4. When hook lifting, the components must be the in the direction of the rear of the lifting.
Lifting must first do try hangings, to avoid excessive lifting, minimize the objects stay in the air,
suspended substance to slow even when landing.
5. When working, the abrasion of wire rope should be often observed. When the crane boom
angle is large, the hanging material should first be down to the position, in keeping the sling
tension condition, then lower hoist boom, loose rope, and pick the hook.
6. Hoist boom lift must fall back when: do not lower down the arm when lifting heavy objects.
The throttle is smaller when lowing the arm and bigger when lifting. Rotary motion is to be steady, not sudden reversal, when close to the rated weight load, shall not air rotary when the ground clearance is 0.5 m above.
7.It is strictly prohibited to lifting when driving, the lift arm must be put on the bracket when driving, the hook is in the bumper, and the wire rope to pull tight.
8. After the completion of the work, lifting legs and sawing arm shall not simultaneously.
Truck Crane Service Configuration
Rectangular tube:300
Active leg: 5
Rotary support: 1 meter
Planetary reducer: one grade
Double winch: 8 ton/5 ton
Outside the rope: 6 meter 5 knots 450*300
Single top louder roof: 180
Single pump hydraulic system
Motor: 11kw
Rear operating room
Full cover plate
Jining, Shandong, China
Send your inquiry to this supplier