8.5/15KV COPPER/XLPE/SWA/PVC power cable

  Product Description   8.5/15KV COPPER/XLPE/SWA/PVC power cable Cable Selection

It is essential that the type of cable ordered is suitable for its intended use. Cable choice will be based on a whole range of factors including installation specifications, relevant local regulations and the performance of appropriate cable types. It is therefore impossible to provide a conclusive guide to cable selection and we would advise you to contact us for our specialist advice on suitable designs to meet you specific cable needs.   Conductors

Conductors shall be of Copper or Aluminium, circular standed(Non-compacted or Compacted) or Shaped, Class 2 to IEC 60228, BS EN 60228. For smaller sizes, a solid circular conductor, Class 1 as per IEC 60228, BS EN 60228 can also be supplied upon request.   Insulation XLPE material and thickness shall be as per IEC 60502 or BS 5467 rated for 90°C continuous operation. PVC material and thickness shall be as per IEC 60502 or BS 6346. PVC insulation Material-Type A as per IEC 60502 or TI1 as per BS EN 50363. PVC insulation as per SASO 1694 rated for 85°C continuous operation is also available on request. Assembly

Two, Three or Four insulated conductors are laid-up together with non-hygroscopic fillers compatible with the insulation material and the assembly is bedded with an extruded layer of PVC. In case of non-armoured cables, this layer may be omitted if the outer shape of the cable remains practically circular.

Armour

Galvanized Steel Wires applied helically over the bedding as per IEC 60502 or as per BS 5467, BS 6346. (Single core cables shall be Aluminium wire armoured) Double Steel Tapes applied helically over the bedding of multi-core cables as per IEC 60502.

Outer Sheath

Outer sheath will be extruded PVC type ST2 as per IEC 60502-1, Type 9 as per BS 7655. Special type of PVC sheathing material such as fire retardant PVC, anti-termite and anti-rodent PVC, ultraviolet PVC, Oil resistant PVC, etc. are available on request also other special sheathing materials such as LLDPE, MDPE, HDPE, LSF, CPE etc are available.

Fire Performance of Cable Sheaths

Cables can be supplied with special flame retardant PVC outer sheath to comply with the flame test requirements of IEC 60332-3-22, IEC 60332-3-23 and IEC 60332-3-24, can also supply cables with Low Smoke Halogen Free (LSHF) material according to IEC 60502-1, BS 7211, BS 6724 or other equivalent standards. Note: Due to the limited space, all kinds of spec. can't be shown here. For more spec. request, please contact me freely.            Packaging & Shipping For this 8.5/15KV COPPER/XLPE/SWA/PVC power cable, we use packaging:   1) All wooden drum 2) Iron - wooden drum 3) All iron drum Shipping by container.       Our Services   We can design and manufacture wires & cables according to the standards of GB, JB, IEC, BS, DIN, ASTM, JIS, NF, AS/NZS, CSA, etc. Our products have been widely supplied to power utilities, electrical materials distributors and dealers, construction and engineering firms, electrical contractors or industrial companies all over the world, as well as Africa, Middle East, South-east Asia, South America,Central America,North America, Europe ,Australia and so on. Welcome your OEM and ODM orders.   Our main products are as follows: 1)Bare Conductor ,such as AAC,AAAC,ACSR,ACAR,AACSR,ACSR/AW and so on; 2)Aerial Bundled Cable (1kV-35kV ),such as Duplex,Triplex,Quadruplex Drop Wires and so on; 3)PVC Insulated (Flexible ) Wire ; 4)  PVC Insulated and Sheathed (Armoured) Power Cable; 5)Low, Medium, High Voltage (1kV-220kV) XLPE Insulated (Armoured) Power Cable; 6)Welding Cable, Control Cable, Concentric Cable, Rubber Sheathed Cable and so on; Workshop and Inspection     FAQ   1. How many years has Henan Jiapu Cable Group been in production? Founded in October 1998 by Mr. Gu, our facility has three separate manufacturing workshops within its 100,000-sq.-ft. building. In 2012, we operates in a new 666,000 sq. foot state-of-the-art facility in Xiaodian Industry Park.,Xinxiang, Henan ,China   2. What kinds of products does Jiapu Cable manufacture? 1)Bare Conductor ,such as AAC,AAAC,ACSR,ACAR,AACSR,ACSR/AW and so on; 2)Aerial Bundled Cable (1kV-35kV ),such as Duplex,Triplex,Quadruplex Drop Wires and so on; 3)PVC Insulated (Flexible ) Wire ; 4) PVC Insulated and Sheathed (Armoured) Power Cable; 5)Low, Medium, High Voltage (1kV-220kV) XLPE Insulated (Armoured) Power Cable; 6)Welding Cable, Control Cable, Concentric Cable, Rubber Sheathed Cable and so on;   3. What kind of certifications do you have? SABS, CE, ISO9001-2000, SGS   4.Which markets do you involve mainly in? Our products have been exported mainly to Africa, Middle East, South-east Asia, South America,Central America,North America, Europe ,Australia, etc.   5. Which standards do you comply with when you produce the electrical wires and cables ? We are able to produce electrical wires and cables based on GB, JB, IEC, BS, DIN, ASTM, JIS, NF, AS/NZS, CSA, etc. Meanwhile, we can design and manufacture the cables according to the samples and technical specification the customer supply.   6. What is the min.order quantity ? It depends on the type and size of electrical wires and cables. For some small electrical wires, 100 meters can be accepted .But for the power cables with medium or high voltage, that should comply with the property of installed equipments. Anyhow,we will try our best to solve the problem and meet with the requirement If you have special request.   7. What is the production capacity per week or per month ? For the bare conductor, we can finish 3000 tons within one month. For power cables, that depends on the type and size. The total output value per month is approx. USD3,000,000.00 for insulated aluminum cables and that is approx. USD8,000,000.00 for insulated copper cables.   8. Do you supply the customers with installation service in foreign country ? We don’t have professional installation teams in foreign country.But if that is necessary, we will recommend our partners to cooperate with you.