Product description
New 6V battery LED small PIR motion sensor night light
Overview:
- It is a PIR sensor night lamp, which integrates the PIR motion sensor and LED into one
- It is mainly used for auxiliary lighting when sleeping at night
- To set to auto mode, when motion signal is detected in dark, it will be automatically turn on
- To set to on mode, it will be consistently turn on
- Used as the common night lamp for auxiliary lighting
- In auto sensing mode, it will distinguish the ambient light intensity automatically
- When motion signal is detected, it won’t turn automatically on in daylight, and will be auto-on in the dark (<10 lux)
- The lamp will be auto-off after 10 seconds when there is no following signal detected
- If there are other signals detected during the delay time, it will add the delay time and the lamp is on
- You can set to on, if you need consistent lighting, you can set it to off mode, if you don’t need the lamp working
- It can be placed on the table where motion signals are easily detected
Specifications:
- Power supply: 4*1.5V batteries
- LED light source: 3528
- Working current: 90mA
- Static current: 30-40μA
- Rated load: 0.36W max
- Single power: 0.06W
- LED qty: 6pcs
- Switch type: PIR
- Time setting: 10 ±2sec
- Detection range: 6-8m (24°C)
- Light control: <10 lux
- Detection angle: 140°/120°
- Working humidity: <93% RH
- Color temperature: 3,000, 4,000, 6,000K
- Certification: CE, EMC, FCC
It is a PIR sensor night lamp, which integrates the PIR motion sensor and LED into one
It is mainly used for auxiliary lighting when sleeping at night
To set to auto mode, when motion signal is detected in dark, it will be automatically turn on
To set to on mode, it will be consistently turn on
Used as the common night lamp for auxiliary lighting
In auto sensing mode, it will distinguish the ambient light intensity automatically
When motion signal is detected, it won’t turn automatically on in daylight, and will be auto-on in the dark (<10 lux)
The lamp will be auto-off after 10 seconds when there is no following signal detected
If there are other signals detected during the delay time, it will add the delay time and the lamp is on
You can set to on, if you need consistent lighting, you can set it to off mode, if you don’t need the lamp working
It can be placed on the table where motion signals are easily detected