Specifications SDH Multiplexer
STM-1 optical interfaces with 1+1 redundancy
online real-time monitoring
Modular configuration
60FXO/FXS 24E1 STM-1/STM-4 E&M V.35 EOS msap SDH multiplexer STM-1 to ethernet converter IDM MSAP155-24 sdh multiplexer is a newly-developed optical fiber transmission equipment by RDT company based on SDH technology. It manages to satisfy not only users needs for , and other fiber optical transmission/access services, but also users needs for and more reliable . IDM MSAP155-24 STM-1 to ethernet converter can be directly connected to the remote PDH multiplexer, optical modem and multi-service multiplexer and so on, it fits a variety of . It can be used as a small MSAP equipment which integrates multiservice access, SDH transmission and PDH optical access functions. It also provides succinct and faultless which would carry out equipment configurating, , data collecting and real-time monitoring on network performance. Picture
Front panel structure
After the device panel structure Features 1. Two STM-1 optical interfaces with 1+1 redundancy.(Either one fails, the other will back it up) 2. Two V.35/V.11 [N × 64K (N = 0 ~ 31)] channels. 3. Integration of SDH, PCM, PDH and Ethernet. 4. Provide up to 4 ethernet networks with physical isolation, to achieve N × 2.048Mbps bandwidth. 5. Provide 6 slots can be inserted with 3 service disks, 8E1 interface optional, 8E1+100M PDH, network bridge interface, 8 telephone interface, 8-way RS232/RS485/RS422 interface. 6. Modular configuration and is upgradeable. 7. Support point-to-point, chain-shaped and ring network. 8. Compliance with the ITU-T G.813 standards and fully meet the timing accuracy. 9. Faultless feature, online real-time monitoring. 10. Standard 19-inch 1U chassis structure, easy to install. Specifications Optical interface
Rate | 155Mbps±4.6ppm | Adaptive fiber | Single/multi-mode |
Consumption | -15 ~ -8dBm | Wavelength | 1310nm/1550nm |
Physical connector | FC/SC | Sensitivity | Better than -32dBm |
E1 interface
Rate | 2048Kbps | Code | HDB3 |
Comply with | ITU-T G.703 standard | Impedance | 75Ω/120Ω |
Frame structure | PCM30/31 | signaling | Inbound Signaling |
Channels | Up to 24 |
Ethernet interface
Rate | N × 2.048MbpsN≤50 | Duplex | Full/Half auto-negotiation |
Physical connector | RJ-45 | Comply with | IEEE802.3 |
FXO/FXS interface
Impedance | 200Ω + 560Ω//0.1μF | Audio frequency range | 300Hz ~ 3400Hz |
Compression ratio | Class A in ITU G.711 | Loop current | 25mA |
EM2/4 interface
Audio frequency range | 300Hz ~ 3400Hz | Compression ratio | Class A in ITU G.711 |
Echo loss | >18dB | Impedance | 600Ω balanced |
V.24 interface
Rate | asynchronous <=9600bps and asynchronous 64kbps | Comply with | CCITT V.28 |
V.35 interface
Rate | N × 64KbpsN=0 ~ 31 | Comply with | ISO2593 |
Physical connector | RJ-45 | Comply with | ITU-T V.35 |
Power Supply 220VAC/- 48VDC Consumption: ≤50W Operating environment
Temperature | -30oC~ 50oC | Humidity | 0 ~ 95% (non--coagulation) |
Dimensions Width × Depth × Height (mm): 440 × 230 × 45 Application1:
Application2:
About our Raytrans:
Technical centre can offer you the Best technical support
Production centre can offer you the Best production quanlity
Test centre ensure every product work well
Storage centre send you product in time Certified:
Our Services: