Model No. :	BL600EKH-PET
Brand Name :	Bole Machinery
Type :	Preform Injection
Structure :	Horizontal
Plastic Type :	Thermosetting
Plasticizing Way :	Screw Type
Clamping Way :	Hydraulic
Automation :	Automatic
Computerized :	Computerized
Certification :	SGS
Bole :	Pet Injection Moulding Machines

EKH系列PET瓶胚专用机技术参数表		UNIT	BL600EKH/C5800/PET
国际标准规格	International specification		5800

螺杆直径	Screw diameter	Screw specification	Special for PET
螺杆直径	Screw diameter	mm	100
螺杆长径比	Screw L/D ratio		25
理论注射容积	Theoretical injection capacity	cm3	3925
注射量 (以PS计)	Shot weight(PET)	g	4553
注射量 (以PS计)	Shot weight(PET)	oz	160.9
最大对空注射速率	Injection rate into Air	cm^3/s	980
最大对空注射速率	Injection rate into Air	g/S	892
注射压力	Injection pressure	MPa	149
理论塑化速度	Theoretical plasticizing speed	g/S (PET)	150
注射行程	Injection stroke	mm	500
最大注射速度	Max. injection speed	mm/s	125
最大螺杆转速	Screw speed	r/min	135

系统压力	Sys. Pressure	MPa	17.5
电机总功率	Pump Motor(Min～Max)	kW	77.4～86.7
电机数量	number of Motors	PC	2
电热功率	Heater power	kW	43
温控区数	Number of temp. control zones		5+1

锁模力	Clamping force	kN	6000
开模行程	Opening stroke	mm	900
拉杆内间距	Space between tie bar	mm x mm	910×855
最小模具厚度(T型槽)	Min. mould height	mm	380
最大模具厚度(T型槽)	Max. mould height	mm	910
最大模板距离(T型槽)	Max. Daylight	mm	1810
顶出行程	Ejector stroke	mm	220
顶出力	Ejector force forward	kN	166
顶针回缩力	Ejector force back	kN	117
顶出杆数	Number of ejector bar	PC	21

干循环时间	Dry cycle time	S	4.4
能耗（注1）	Energy consumption level	kW.h/kg	≤0.5
料斗容积	Hopper capacity	kg	100
油箱容量	Oil tank capacity	L	750
机械外形尺寸(约)	Machine dimensions(L×W×H)	m x m x m	9x2.2x2.75
机器重量(约）	Machine weight	Ton	22

600 ton PET injection moulding machines new

600 ton PET injection moulding machines new

Bole centre clamping structure

■ 100% clamping force use, 10%-20% higher than traditional toggle structure. ■ Less possibility of flash, save flash trim work. ■ Save 2-5% material. ■ Offer good protection to mould, platens and tie bars. ■ Opening stroke 10-20% longer.

2. Bole Competitive Philosophy

Leading technology and performance China unique producer, central locking toggle CIML carbon-fiber products intelligent moulding line, made for lightweight of automobile The performance of Electro- hydraulic hybrid two platen machine has reached the leading level

3. Clients Cases

■ 100% clamping force use, 10%-20% higher than traditional toggle structure.

■ Less possibility of flash, save flash trim work.
■ Save 2-5% material.
■ Offer good protection to mould, platens and tie bars.
■ Opening stroke 10-20% longer.

Leading technology and performance

China unique producer, central locking toggle

CIML carbon-fiber products intelligent moulding line, made for lightweight of automobile

The performance of Electro- hydraulic hybrid two platen machine has reached the leading level