6 Zone 500W Mixer Amplifier module with 70V 100V Balance Output PA A1500P Monoblock Amplifier Class AB Product Description 6 Zone 500W Mixer Amplifier module with 70V 100V Balance Output PA A1500P Monoblock Amplifier Class AB 3 AUX line input(AUX1,2,3), every single channel can adjust volume independently. 1 line output can connect with power amplifier to expand power. 2-way microphone input (MIC 1,2); The MIC1 has highest priority and function of forced-cut priority. Every single channel can adjust volume independently. Channel MIC2 is attached with Aux Input Knob "TREBLE","MASTER" and "BASS" adjust volume independently, and volume volume for every single circuit. Adopt Field-Effect Tube pre-amplifier, traditional transformer audion push-pull circuit,transmitted tone pretty and pure. Built-in 2 filter(High Pass filter and Low-Pass Filter), it will clip wave and restore signal to insure integrated line security. Reliable protection and warning function: relevant indicator light will flicker to hint the operator if there are the conditions of overlarge input signal, overweight load and short circuit. Perfect temperature protection measure: Adopting large current high-speed fan, low noise and excellent heat dissipation effect. The temperature protection circuit will start fan automatically when the temperature of device goes up. What's more, the rotating speed of the fan will enhance automatically with rising of device temperature. 2 kinds of power output mode: Constant voltage ouput 100V,70V; Rated resistane ouput 4~16 Ω
Note: Customers can choose certain kind of Fault Detect Module to test short circuit ouput. Meanwhile, it can be extended to realize switchover for Main/Spare Amplifier automatically.
Technical Parameters of this Audio Amplifier
Model | PA-A1500P |
Power Supply | 220V/50Hz |
Power | 500W |
Output Mode | 4~16Ω balanced output 70V/100V Constant voltage output |
Auxiliary Output | 600Ω 1V(0dB) |
Input | MIC1.2:600Ω 20mv, AUX 1,2, 3:15KΩ 150mv imbalance |
Frequency Response | 80Hz~15KHz |
THD | Less than 1% at 1KHz, 1/3 rated power |
SNR(Signal to Noise Ratio) | Microphone1 2: 66 dB AUX1 -3: 80dB |
Volume Control | Bass: ±10dB at 100Hz Treble: ±10dB at 10KHz |
Protection | DC ouput, Overloading, Overheating, short circuit |
Silent Sound Function | MIC1 input cover other input, highest priority |
Power consumption | 650W |
Amplifier size | L484xW420xH88mm |
Net Weight | 20KG |
Function of Knobs and Terminals on front panel
Function of Terminals on back panel
Announcements: Distinguish the anode and cathode of loudspeaker. Its anode should be connected with the anode of amplifier and its cathode should be connected with the cathode of amplifier when the circuit of amplifier connect with that of loudspeaker, or the equipments would be damaged. Teanma Ceiling Speaker Series, red circuit is anode, black circuit is cathode, COM is cathode, 100V/4Ω/8 Ω is anode. Actually, the mark"4Ω" in amplifiers can connect 4Ω-16Ω. production process
HOT SALE
Company information
Exhibition
Certificate
Contact information
Home