Products Features- led lights Road lighting die casting 1. Modular Pluggable Technology, tool-free to maintenance 2. Honeycomb and whole structure cooling technology, high efficient heat dissipation 3. Double-coupling IP68 protection, higher watreproof level 4. "Ultra Robust" Module technology, single unit's damage doesn't affect other unit's current 5. Multi-circuit constant current driver, single module hot-pluggable 6. Ergonomic light distribtion to achieve even iuminating effect 7. Free modular serialization and full power rang solution
Main Parameters- led lights Road lighting die casting
Model No. | ECO-T1A4 |
LED Light Source | Lumileds |
LED Quantity | From 4 module to 7 modules |
Operating Voltage | 90-305VAC |
Lamp Power | 40~280W |
Power Efficiency | 91% |
Power Factor | 0.95 |
Lamp Rated Total Luminous Flux | 3,600~25,200lm |
Lamp Rated Luminous Efficiency | 100lm/W |
Color Rendering Index | Ra>70 |
Color Temperature | Cool white: 6000K |
Pure white: 5300K |
Warm white: 4100K |
Beam Angle | 60°, 90°, 120° |
Light Distribution Curve | Batwing Light Distribution Curve |
Temperature of Junctions (TOJ) | <70° |
Peak Lighting Angle | 125° |
Storage Temperatures | -40°C~50°C |
Working Environment | Between-40°C~+50°C, 10%~90%RH |
Total Harmonic Distortion | < 10% |
LED Life Span | About 50,000 Hours |
Wind Index | Force 12 |
Body and Shell Materials | Aluminum Alloy |
IP Rating | IP 68 |
Installation Instructions- led lights Road lighting die casting 1. Open the rear cover 2. Insert the light pole into lamp holding brackets and fix the 4 screws 3. Connect the AC wire led lights Road lighting die casting 4. Close the rear cover ad fasten up the 2 screws on the backside surface of the lamp led lights Road lighting die casting
Products Size- led lights Road lighting die casting
Tool-free Maintenance- led lights Road lighting die casting 1. Open the rear cover, pull up the buckers; 2. Life the 2 copression bars of the lamp; 3. Unscrew the waterproof connectors; 4. Take out of the driver or modulars; led lights Road lighting die casting 5. Replace the driver or modulars, then press down the bars and buckle them up; 6. Close the rear and fasten up the 2 screws on the backside surface of the lamp led lights Road lighting die casting
Professional Project Design Service- led lights Road lighting die casting
Production Center - led lights Road lighting die casting
Higher Protection Degree: IP68- led lights Road lighting die casting
Test Equipment- led lights Road lighting die casting
Certification- led lights Road lighting die casting
Trade Terms - led lights Road lighting die casting
Application- led lights Road lighting die casting 1.street lighting 2.park lighting 3.roadway lighting 4.fence lighting 5.pathway lighting 6.campus lighting 7.ramp lighting 8.boat dock lighting 9.sidewalk lighting 10.remote area lighting led lights Road lighting die casting