1 / 1
Model No. : | ER5356 |
---|---|
Brand Name : | Jingyuan |
Product description
AWS A 5-10 Data | ER1060 | ER1100 | ER2319 | ER4043 | ER4047 | ER5356 | ER5183 | ER5556 | |
Typical composition in% | Si | <0.25 | Si+Fe<0.95 | <0.20 | 4.50-5.50 | 11.00-13.00 | <0.25 | <0.40 | <0.25 |
Fe | <0.35 | <0.30 | <0.80 | <0.60 | <0.40 | <0.40 | <0.40 | ||
Cu | <0.05 | 0.05-0.20 | 5.80-6.80 | <0.30 | <0.30 | <0.10 | <0.10 | <0.10 | |
Mn | <0.03 | <0.05 | 0.20-0.40 | <0.05 | <0.15 | 0.05-0.20 | 0.50-1.00 | 0.60-1.00 | |
Mg | <0.03 | - | <0.02 | <0.05 | <0.10 | 4.50-5.50 | 4.30-5.20 | 4.70-5.50 | |
Cr | - | - |
|
|
| 0.05-0.20 | 0.05-0.25 | 0.05-0.20 | |
Zn | <0.05 | <0.10 | <0.10 | <0.10 | <0.20 | <0.10 | <0.25 | <0.20 | |
Be | - | <0.0008 | <0.0003 | <0.0003 | <0.0003 | <0.0003 | <0.0003 | <0.0003 | |
Ti | <0.03 | - | 0.10-0.20 | <0.20 | <0.15 | 0.06-0.20 | <0.15 | 0.05-0.20 | |
Physical properties(Approx. Values) | 0.2% yield strength Rp0.2 Mpa | 20 | 25 | 180 | 40 | 60 | 110 | 125 | 125 |
Tensile strength Rm Mpa | 65 | 80 | 240 | 120 | 130 | 240 | 275 | 275 | |
Elongation A5(L0=5d0) % | 18 | 25 | Ca.3 | 8 | 5 | 17 | 17 | 17 | |
Test temperature ℃ | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 |
AWS A5.10 | Joint Strength | Parent metal | Characteristics |
Standard | (Mpa) | ||
ER1070 | Above 55 | Pure aluminum series105010701080 | Good anti-corrosive and plasticity |
ER1100 | 80-110 | Pure aluminum series1100 | Good anti-corrosive and plasticity |
ER1200 | 80-110 | Pure aluminum series1200 | Good anti-corrosive and plasticity |
ER2319 | 400-450 | Pure aluminum series2219 | High intensity after heat treatment |
ER4043 | 170-250 | Al-Mg-Si casting aluminum | The anti-thermal crack performance of the welded joint is good, but the plasticity, toughness are low, becomes grey black after anodic process |
ER4047 | 170-250 | Casting Al. ,Al-Cu casting ,Ag-Mg-Si casting | The anti-thermal crack performance of the welded joint is good, but the plasticity, toughness are low, becomes grey black after anodic process |
ER4145 | 200-300 | Al-Cucasting20142017 | The anti-thermal crack performance of the welded joint is good, but the plasticity, toughness are low, becomes grey black after anodic process |
ER5554 | 180-240 | low Mg content5052,5454casting | Use chemical equipment with a temperature above 65 |
ER5654 | 210-270 | medium Mg content5154casting | medium intensity,good anti-corrosive |
ER5356 | 270-310 | Al-Mg casting, Al-Mg-Si casting, Al-Zn-Mg casting | Typical welding wire used most widely, good mechanics performance and anti-corrosiveness |
ER5556 | 280-320 | Al-Zn-Mg casting, Al-Mg casting | The connector intensity is high, and the moulding performance and tenacity is inferior to 5183 |
ER5183 | 280-310 | Al-Mgcasting5083 | Typical welding wire used most widely, good mechanical performance and anti-corrosiveness |
Send your inquiry to this supplier