5.5kw High Quality screw air compresor Product Description The screw air compressor main configures as follows: 1. Main frame: ZiQi 2. Bearing:100% Sweden SKF (LIFE60000hours ) 3. Solenoid valve: CEME Italy 4. Electro motor: ABB WOLONG 5. Thermostat valve : Austria Hoerbiger 6. Pressure sensor: Switzerland Huba imported with original 7. Container: shanghai shenjiang 8. Oil filter: Germany MANN company imported with original 9. Oil and gas separator: Germany MANN company imported with original 10. Lubricating Oil: Sweden Atlas screw air compressor oil imported with original 11. Suction valve: Sweden Atlas imported with original 12. Pressure valve: Hoerbiger Austria company 13. PLC: Schneider Electric France 14. Oil system configuration of the pipeline were chrome-plated brass More than 80% of imported famous brand accessories! Technical parameter
type | water pressure(Mpa) | exhaust pressure(M³/Min) | power(KW) | noise(DB(A)) | lengh(Mm) | weight(Kg) | diameter(Mm) | inter diameter(Luch/Mm) |
GA-3.7A | 0.7 | 0.55 | 3.7 | 60±2 | L | 650 | 220 | 20 | - |
0.8 | 0.45 |
| | M | 630 |
| | H | 760 |
GA-5.5A | 0.7 | 0.8 | 5.5 | 62±2 | L | 650 | 230 | 20 | - |
0.8 | 0.7 |
1.0 | 0.6 | M | 630 |
1.3 | 0.5 | H | 760 |
GA-7.5A | 0.7 | 1.3 | 7.5 | 63±2 | L | 1000 | 270 | 20 | - |
0.8 | 1.2 |
1.0 | 1.1 | M | 750 |
1.3 | 0.9 | H | 950 |
GA-11A | 0.7 | 1.8 | 11 | 63±2 | L | 1000 | 280 | 20 | - |
0.8 | 1.7 |
1.0 | 1.5 | M | 750 |
1.3 | 1.2 | H | 950 |
GA-15A | 0.7 | 2.7 | 15 | 63±2 | L | 1260 | 540 | 25 | - |
0.8 | 2.5 |
1.0 | 2.3 | M | 850 |
1.3 | 2.0 | H | 1220 |
GA-18.5A | 0.7 | 3.2 | 15 | 64±2 | L | 1260 | 550 | 25 | - |
0.8 | 3.0 |
1.0 | 2.8 | M | 850 |
1.3 | 2.4 | H | 1220 |
Spare parts of air compressor 1.Air Filter: in general, we should clear the dust o the surface of air filter every 1000hours,and the method is to blow down the dust from inside to outside. 2.Air Inlet Valve: When starting,stopping or emptyit all uses the two-way solendid valve action to control the air inlet valve piston and up close valve.If the pressure resches the upper limit valve of pressure switch,the pressure switch will act,and the two-way solenoid valve begins to discharge and pushes up the air lnlet piston to close the valve and become empty load state. 3.Oil filter: oil filter is a kind of filters of paper characteristic with the function to remove the impurities in oil,such as mental particles,oil deterioration and so on,its filtering precision is between 10μ-15μ,which will well pretect the bearing and rotors. 4.Cooling System:cool air sucked by a circulating fan to blow over the heat dissipating fins of cooler and exchange heat with compressed air and lubricating oil to reach the cooling effects. 1. Host body ( air end )
2. Air end discharge terminal adopts SKF company TRB (tapered roller bearing)
3. Direct driven type -- from 55kw to 355kw
4.The motor is Brazilian WEG brand
5.High quality Air filtre
6.More informations:
picture
Company Information
Packaging & Shipping