Product Description 4W Wireless outdoor waterproof wifi booster to enhance wifi signal
Operating frequency | 2400-2483.5MHz |
Operating mode | TDD (Time-division duplex) |
Signal standard | IEEE 802.11b/g/n |
Minimum input power | 3dBm |
Maximum output power | 36 dBm(4w) |
Uplink gain | 15±1dB |
Downlink gain | 10dB - 17dB adjustable |
(8dB attenuation range in 1dB steps) |
Noise figure | ≤ 2.5dB |
Delay | <1uS |
Operating temperature | 25°C to + 60°C |
Weight | 0.6kg |
AP/Router Interface | SMA Female |
Antenna Interface | RP-SMA Male |
Instructions : 1: Connect Antenna to the Wi-Fi Booster. Caution: The Booster antenna interface can only connect antenna, Don’t connect to any other wireless products in any case, otherwise it will result in equipment malfunction or damage. 2: Connect Wireless AP/Router or Wireless Network Card to the Wi-Fi Booster. Tips: Users can also use other shielded cables to connect, but the cable length should be as short as possible, preferably not exceeding 3m. 3: Power up the Wi-Fi Booster. At first, the Light of the LED is very dark. When the data is being transmitted, the light will become very bright. The more dense data transmission, the more bright light. Caution: Before Power up the Wi-Fi Booster, you must Power up the AP/Router first. 4: Adjust the Antenna position and angle, make the Wi-Fi Booster achieve the best performance. Attention: 1: The default Downlink gain is 13dB, It is not the higher the better, You must ensure that the final transmit power must not be larger than 36dBm (4w). 2: The Downlink gain is too high may cause the booster not work correctly, The wireless link cannot be successfully connected, or even lead to the booster damage. 3: You need to reduce the Downlink gain when it's combined with a high-power AP/Router. 4: You need to increase the Downlink gain when it's combined with a low-power AP/Router.
Packaging & Shipping
Our Services Company Information
FAQ