433/868MHz intelligent smart fingerprint remote control for gsm alarm system

Specifications 1.Wireless touch gsm alarm system

2Touch Keypad,LCD display

3.Dual Network:GSM/PSTN auto switch

433/868MHz intelligent smart fingerprint remote control for gsm alarm system DP-16R  This dual network alarm system with the fingerprint remote control will be more safe, you can arm and disarm the alarm system with the fingerprint remote control.   Features: 1. Inbuilt touch keypad, blue backlight for keypad
2. Concise icons guided LCD display.
3. 15 wireless zones, every zones could connect 4 wireless detector. (2 wired zone optional)
4. Alarm report by: phone call and SMS
5. 5 telephone/mobile phone numbers can be preset
6. Arm/Disarm by: inbuilt keypad, remote,phone call, SMS, (wireless keypad optional)
7. AC/DC both available
8. Alert of weak power, no power
9. Monitoring and alert of door/window status (optional)
10. Electrical appliance control and scene control (optional)
11. "Black Box": 100 work history and 100 alarm history
12. Compatoble with CID Protocal (extra GSM SMS connector required)
13. GSM Dual-Band, (Quad-Band optional)   14. Those sensors are equipped with rechargeable li-battery, environment protection, source saving.      Technical specifications:    

Power supply voltage	AC input : 100 ~ 230VAC DC output : 1A / 12VDC
the quiescent current	<50mA ( non-rechargeable state) Alarm current : <500mA
the working environment	Temperature : -10 to 50 ° C Humidity: < 80%
the back-up battery	lithium battery : 3.7V / 1200mAh
standby Length	24 hours ; charge time : 12 hours
GSM Frequency	850/900/1800 / 1900MHZ
GSM transmit power	2W
Wireless Frequency	433 / 868 MHZ(optional),1527 learning code 2262
the host size	150 × 107 × 26 ( mm)
Package size:	330 ×240 ×80 (mm)

    Total 50 fingerprints can be restored.   1. can’t register same fingerprint twice, it will warn a short beep. 2. 50 register full: when register more it will warn as 2 long beeps. 3. Operation over time: hear one short beep. 4. Wrong fingerprint register: hear 3 short beeps. 5. Battery low warning: LED flash 4 times with 4 short beeps, keep 5 times. 6. Requester authorize: 2 short beeps. 7. Register succeeds: a long beep with LED flashes 5 times. 8. Clear all fingerprint: a long beep with LED ON, then power off. 9. Change address code: press SW9, a long beep.   fingerprint remote control technical parameter:  

No.	Technical Parameters	Contents
1	Fingerprint Module	30M pixels CMOS with steeples coated glass
2	Fingerprint resolutions	450DPI
3	Acquisition time	<0.5sec
4	Test and verify time	<1sec
5	Cooperation time	1:N
6	False rejection rate(FRR)	≤0.01%
7	(FAR)	≤0.0001%
8	Fingerprint angle	360 degrees
9	Fingerprint setting memory	Confirm twice
10	Fingerprint update	Automatic update
11	Fingerprint template memorize	Changing battery will automatically memorize
12	Most fingerprint numbers	50
13	Light interference	Outer light recognizable
14	Optical glass	Nanometer coated film,enhanced abrasion
15	Standby power consumption	0mA
16	Standby temper	Currency 125uA
17	Dynamic start	Power on mode
18	Working Voltage	Standard battery,4pcs 1.5 alkaline cell,DCV
19	Battery life	>1year
20	Power supply	4 x “AA” Size Battery
21	Storage	Temperature: 5℃---60℃
22	Dynamitic currency	120mA----140mA
23	Low battery Warning	<4.4V
24	Working temperature	-10℃---50℃
25	Dimensions	70mm x 120mm x 35mm