Servo motor injection molding machine 2800T
Reliable injection molding machine with servo motor, equiped with servo motor, closed loop control for pressure and flow.
Plastic injection molding machine with high standard configuration.
Double cylinder alance injection structure
Four-stage setting for injection speed, pressure, position
Three-stage setting pressure holding material charging speed, pressure, position
Injection position monitoring function
Injection position scale control
Screw cold start prevention function
Three option mdes for seat
plastic injection molding machine 2800t can make pallet,pvc pipe
Low noise, High precision and stable performance.
Plastic injection moulding machine, plastic machine, molding machine
Control part:
1.It adopts imported computer for plastic injection machine , with large screen . high definiyion crystal display and human-computer interface in different languages. Through CPU independent control and individual treatment. It has raised the running speed of thr control system and alarming of successive oil temperature , thus I,proving the operating speed of the machine.
2.Closed -loop temperature control system to ensure the accuracy and reliability of the barrel temperature . The functions of cold -proof boot, alarming and parameter memory for the molding, with password protection. The injection and switch are controlled by imported ruler.
Injection part:
1.The excellent chrome , molybdenum and aluminum alloy screw and barrel have undergone the nitrilizing process, applicable to various plastic materials.
2.The injection cylinder( is parallel or balance for both sides of the barrel, so as to ensure the non-deviation of thr nozzle, good sealing and non-leadage. It is equipped with double guide pillar supporting system which can inject under multifarious pressure at various speeds. It also uses one-stop hydraulic pre-injection device.
ITEM |
Z2800 |
injection unit |
|
A |
B |
C |
screw diameter |
mm |
170 |
200 |
215 |
shot volume(theoretical) |
cm3 |
19293 |
35154 |
43530 |
injection weight(ps) |
g |
17557 |
31990 |
39612 |
injection rate |
g/s |
1779 |
2095 |
2121 |
injection pressure |
Mpa |
161 |
137 |
135 |
screw speed |
rpm |
60 |
50 |
45 |
clamping unit |
|
|
|
|
clamping force |
kN |
28000 |
open stroke |
mm |
2000 |
space between tie bars(WxH) |
mm |
1900X1750 |
max mould height |
mm |
1900 |
min mould height |
mm |
1000 |
ejector stroke |
mm |
450 |
ejector force |
kN |
430 |
others |
|
|
|
|
max pump pressure |
Mpa |
16 |
pump motor power |
kW |
55+55+55+55 |
heating power |
kW |
171.7 |
171.7 |
187.9 |
machine dimension(LxWxH) |
m |
18.9X9.62X5.2 |
18.9X3.92X5.2 |
19.3X3.92X5.2 |
oiltank cubage |
l |
4420 |
|
|
machine weight |
t |
190 |
195 |
207 |