2014 Best Quanlity Glass CO2 Laser Tube (15W~150W)

2013 Best quanlity Glass CO2 Laser Tube (15W~150W)

Bill Laser glass sealed CO2 laser tubes are mainly used for cutting, sculpturing, marking and welding non-metal materials. It could be used in laser mould manufacturing, too. In addition, our laser tubes are used widely in thin metal industry.

It absolutely has broad market prospects and high economic benefits.
In order to make sure the laser beam reach its high power and high quality, we are so strict of theaccuracy process of producing, which can enhance the quality of laser beam.

Numerous experiments have been done to try to avoid the axis disorder between the front and the back cavity mirrors as well as the deformation of discharge tube by long-term use, etc. With a clearer understanding of laser machines' characteristics, real-time observation to the variation of spot modes during the operation of laser machines.

Method of Use

1. To make sure that the electrodes connections are right;

2. To install the cooling water pipe. Please install the tube under the principle that water should be irrigated from negative end to positive, input upsides and output downsides and the outlet can't leak. Before using the tube, the water storage container should be full of water, then ensure that the water cooling tube after imputing water must have no bubble( must check each use).

3. The efficiency of CO2 laser tube is about 15-30%.

4. When installing the laser tube, please make sure that its two stand points should be in the point that is in the 1/4 of the total length of the tube, leaving enough space for the high voltage of the tube and any metal surface. If the clearance is too narrow, then the high voltage used to trigger the tube will spark with the surface of metal, and thus lead to the destruction of the tube and even the damage of major electronic components of laser machine.

5. Users are suggested to add the automatic inspection device into the laser tube's cooling water system in order to avoid the laser tube to be over heated and disordered because of water off. Please consult the supplier of the machine for details.