1 / 1
Product description
Quick Detail:
Servo motor driven pump system
Servo driven hydraulic pump system
Hydraulic servo pump for hydraulic systems
Electric servo pump system
Maximum output power upto 200kW
Compact size and low energy consumption
Suitable for plastic injection machines
High quality with competitive price
Detailed products description:
Servo motor pump system combines the advantages of hydraulic power transmission and an electrically controlled AC servo motor actuator. By enabling optimal energy usage in the partial load range, we offers energy-efficient and cost-effective solutions for power outputs up to 200 kW.
Thanks to years of intensive cooperation with Haitian plastic injection machine manufacturers, we are able to provide innovative and optimized energy-efficient solutions for all plastic industry according to your requirement. After years of market development, our products have been exporting to Europe, America, Asia and other international markets. When you are looking for servo motor pump system for plastic injection machine or have any questions about our products, please feel free to contact us and we will reply as soon as possible.
Competitive advantage of servo motor pump system for plastic injection machine:
Product advantage |
Customer benefit |
Significant reduction in energy consumption and therefore energy costs |
Amortization of any higher initial costs for servo motor and servo drive usually within 1 year |
Excellent regulation characteristics |
Easy replacement of electronic-hydraulic variable pump |
Integrated closed-loop control in converter; compensation for hydraulic non-linearities |
Ability to connect to machine controller without difficulty (Plug & Play) > Retrofits can be made without adapting the control system |
Higher efficiency than a controlled asynchronous motor with variable pump |
Minimal operating costs |
Close partnership with pump manufacturer for optimal system design |
Optimal configuration with respect to costs, noise and energy efficiency |
Large range of air cooling and water cooling motors and inverters (up to 200 kW) |
Cost-effective solution adapted to the customer´s specific requirements |
Less heat entering the system, thus allowing a smaller cooling system |
More compact machine design and additional cost reduction due to less cooling demand |
Lower noise generation |
Less effort required for noise insulation |
Energy efficiency comparison with different motor pump system:
In general, energy-efficient servo motor pump systems only consume half of the energy compared to plastic injection machines during the relevant phases. The largest energy saving effect is achieved during interval times. In this case, the servo motor driven pump stands nearly still and only consumes little energy and maximum energy saving can upto 70% according to actual testing value.
Specifications of servo motor pump system for plastic injection machine:
Motor |
Permanent magnet AC servo motor |
Motor power |
Upto 200kW |
Motor speed |
MAX.2500rpm |
Cooling for motor |
Fan cooling or Water cooling |
Pump |
Medium pressure gear pump: 140kgf/ cm2 QT42-series: 20cc/rev 25cc/rev 31.5cc/rev 40cc/rev QT52-series: 63cc/rev QT62-series: 80cc/rev 100cc/rev 125cc/rev QT82-series: 250cc/rev Gear pump with high pressure upto 175 kgf/ cm2 or higher is also available according to your requirement. |
Temperature protection |
PTC130 positive temperature coefficient thermistor KTY84-130 heat-sensitive switch or according to your requirement |
Note:
Send your inquiry to this supplier