Specifications Extruded insulation power cable
Conform to IEC,BS,ASTM,DIN etc.
ISO 9001 Certificate
Prompt Delivery
Pro.QC/QA system
1kv Extruded insulation power cable 1.Application: apply to rated voltage 0.6/lkV, fixed installation in distribution networks or industrial device. 2.Features: 2.1. Rated voltage:Uo/U is 0.6/1kV. 2.2. Cable laying temperature should not be less than zero degree. 2.3. During short circuit(no more than 5s), The maximum temperature of PVC insulated cable is 160 degree, the maximum temperature of XLPE insulated cable is 250 degree. 2.4. The maximum long-term working temperature which the conductor allowed: PVC insulated cable is 70 degree, XLPE insulated cable is 90 degree. 2.5. The minimum bending radius when cable installed is 15D, close to where connection box located or cable terminals allowed bending radius is 12D.
Model | Core Number | Nominal Cross-section mm² | Description |
Cooper Core | Aluminum Core |
VV | VLV | 1~5 3+2 4+1 | 1.5~240 | PVC insulated PVC (Polyvinyl chloride ) sheathed power cable |
VV22 | VLV22 | 4~240 | PVC insulated PVC sheathed steel tape armored power cable |
YJV | YJLV | 1.5~240 | XLPE insulated PVC sheathed power cable |
YJV22 | YJLV22 | 4~240 | XLPE (Cross linked polyethylene) insulated steel tape armored PVC sheathed power cable |
Remark: 1. The storage place should be dry and ventilated. 2. The drum don't allowed to put vertically, so as during transportation lest crush the cable. 3. Avoid humidity and moisture into the cable core, both ends should not be exposed in the air, use the cable caps to make the ends enclosed. 4. lifting spreader should be used when lift cables, pushing from the vehicle is prohibited. 5. Avoid the moisture into the cable core during transportation.