1channel dimming 0-10v led driver 12v 24v 10a 1-10v dimmer

  1channel dimming 0-10v led driver 12v 24v 10a 1-10v dimmer  Product Description Summarize: This series is 0/1-10V dimmers for led strip and other constant voltage or constant current led lamps,we offer AC and DC input products.No flicker on low brightness.We use logarithmic brightness curve to get smooth and good sense for eyes.They all compatible with products of Lutron,Dynalite,Clipsal,LDS,Osram,Philips,ABB,Schneider,Levition,JUNG,Berker,Be Lichtregler etc. Features of 12v 24v 10a 1-10v dimmer  1, Analog Signal driver,receive 1-10V dimming signal. 2, Single channel constant voltage output,Max.10A per channel. 3, Support active and passive to use. 4, With the self-test function, support short circuit and over current protection functions. 5, When the power turn off,it has memory function. Details of 12v 24v 10a 1-10v dimmer 

Model NO.	Channels	Input Voltage	Max Current Load	Max Output Power	PWM Socket
DM9100	1CH	DC12V~24V	1CH*10A	120W(12V)/240W(24V)	Press button terminal
DM9103	1CH	DC12V~24V	1CH*10A	120W(12V)/240W(24V)	Press button terminal
DM9135	1CH	DC12V~24V	1CH*6A	72W(12V)/144W(24V)	Press button terminal
DM9138	3CH	DC12V~24V	3CH*6A	216W(12V)/432W(24V)	Screw terminal

Size    Function Instruction    1,First way is selecting switch panel to dimming (normally open panel switch mode), must  put the interface (SWITCH DIM) short circuit.   2, When short time press the switch is opening or closing state, the booting has memory and brightness delay light or dark function. Can realize switch light once light up or down instant. 3,When press the switch with a long time,the brightness plus or minus state, long press process then stop, and in 2 seconds again continue long press, so it will keep at the last time brightness state, if is over 2 seconds long press again, then brightness will be instead state control (example: the current light state is added brightness, when adjust to 50% brightness stop, if in 2 seconds long press again, then the brightness from 50% to continue upward, or it will down from 50% brightness). 4,The second way, choose active 0/1-10 v or passive signal control, it is necessary to put the line to jumper(SWITCH DIM line break down), according to the product connection diagram, adjust the 0/1-10 v dimmer SWITCH, so as to change the output of the controller, until get the satisfactory of LED output luminance. 5,In the second way,when the [Analog IN ]port breaking, controller all light output; When the[ Analog IN ] port two terminals short circuit, the output shut down. Wiring Diagram    Remark: 1. Please choose regulating curve smooth 0/1-10 V dimmer, otherwise it may directly affect the LED dimming smoothness. 2. Load LED's voltage and the controller of power supply voltage must be consistent, and must be in the product prescribed voltage input range. 3,0/1-10V Active and Passive dim signal input can get 0-100% brightness output and the dimming curved path is proportional to the dim signal. Packaging & Shipping 1, Customized logo can be available . 2, Customized package can be available . 3, OEM / ODM can be available for us .  After you placed an order, we will deliver the goods ASAP if they are in stock.  The goods will be sent by air, sea, international express or as your requirement. 
Company Information   Shanghai Jibang Electronic Technology Co.,Ltd is a force in LED control system , intelligent control system LED move light research and development of high tech enterprises. DMX control  system application development ,realizes network synchronization control , touch mode intelligent LED dimmers of master slave product research , supporting  large scale control system is applied ,DALI series products ,0/1 10V dimmers ,Triac dimmer  research and development .Products used in outdoor billboard , building bright project ,  indoor decorative lighting ,etc , all sorts of circumstances widely used .   Certifications       FAQ 1,Why choose us ? (1),We are an professional manufacturer focusing on R&D in LED control system for 5 years. (2),All of our LED controllers have got the CE,ROSH certificates. (3),Three years warranty for LED controller products. (4),OEM/ODM are available for us.   2,How did i pay for it ? We accept 100% T/T,Western Union and Paypal for the payment.   3,Did i get a more cheap price ? Sure, We gives discounts for more quantities.   4,Do you have after-sales service ? Yes, Any questions without hesitate to contact by Email,Skype,or Trade manager.