1 / 3
Model No. : | FE-183E |
---|---|
Brand Name : | FREMCO |
Type : | Small Loader |
Jining, Shandong, China
Product description
18 Ton Road Roller Manual Roller
|
road machine reliable and durable hydraulic system: The standard configuration includes imported open gear pump and motor. The optional configuration includes closed hydraulic vibration system, imported piston pump, motor (16t, 18t). All those have a long service life, supplying stable start-oscillation and oscillation stop and high compacting quality.
Road roller included vibrating roller and static road
machine, currently vibrating roller is used widely, it is a good road
equipment, construction equipment.
FREMCO is a manufacturer of construction machinery, mainly
produce road roller, truck crane, crawler excavator, wheel loader, forklift,
backhoe loader and spare part. OEM is accepted, welcome to visit our factory!
Simple operation of road roller :The humanity instrument panel has a reasonable layout, all the control buttons
are clear at a glance. Adopt the gearbox with synchronizer, which is easy to operate.
The special compactor drive axle has the function of preventing slipping,
featuring strong traction.
The driving wheel of the roller should be at the back, whether it is the upslope or the downhill.Doing so has the following advantages: uphill, the back of the drive wheels can inherit the ramp and the driving force provided by the machine itself, at the same time, the front wheel to initial compaction of the road, to withstand large shear force produced by driving wheel;In the lower slope, the impact force generated by the roller is offset by the braking of the driving wheel. Only the mixing material after the front roller compaction will have the ability to produce the shear force of the rear driving wheel.
The bottom layer of asphalt mixture must be clean and dry, whether it is uphill or downhill, and it must be sprayed with asphalt mixture to avoid slippage when the mixture is rolled.
The adjustment of the steering clutch, vibration clutch and brake should be carried out after the main clutch is off. In the upper and lower slopes, fast files cannot be used.When making a sharp turn, including the articulated vibratory roller, it is strictly prohibited to use the fast gear when it is rolled and rolled around the corner. The road roller shall not engage in vibration while driving at high speed.Operating procedures: During operation, the roller should start before the shock, the internal combustion engine should start with the medium speed and then the high speed. Speed change and change of direction should be stopped first, and the speed of the internal combustion engine should be reduced. It is strictly forbidden to vibrate on a solid ground. When crushing the soft roadbed, the roller shall be rolled down 1 ~ 2 times without vibration, and then vibrate. The vibration frequency should be consistent when rolling.To adjust your vibration roller, you should adjust the vibration frequency before the operation, and not adjust the vibration frequency without the vibration.
Wheel shaft classification: According to the wheel shaft, there are single - shaft single - wheel, double - axle, double - shaft, three - wheel and three - wheel.With internal combustion engine as power, adopt mechanical transmission or hydraulic transmission.General front wheel steering, good maneuverability, rear wheel drive.The hinged steering structure and all-wheel drive are suitable for improving steering and rolling performance.Front wheel frame and frame hinged to reduce the normal airframe swing.Rear wheel and rack are rigid join.Adopt hydraulic control, hydraulic cylinder control steering.The front and rear wheels are fitted with a scraping plate to remove the adhesive on the wheel.Also equipped with sprinkler system, used for compacting asphalt pavement, water for grinding wheel to prevent asphalt mixture adhesion.In order to increase the force, it can also add iron, sand and water to the grinding wheel.
Adopt articulated frame, hydraulic walking, hydraulic vibration and all-hydraulic steering system. Vibrating roller adopts its own gravity and vibration compaction in various buildings and construction materials. In highway construction, vibratory roller is the most suitable for compaction of various kinds of non-viscous soil, crushed stone, crushed stone and various asphalt concrete.
It has two kinds of vibration frequency and two-stage amplitude, which can be used for the compaction of different thickness layers and various materials. Imported hydraulic pumps, hydraulic motors and vibrating bearings ensure the reliability of the whole machine. The frame and the hood are designed for optimum design, maintenance and maintenance. With three levels of vibration reduction, the driving room adopts sealed sound insulation measures and the driving is more comfortable.
vibrating road roller Comfortable driving
ROPS driving cab is equipped with an air conditioner, radio and suspended chair. It has a bigger space and broad view inside.
Technical Parameter:
Item |
Model |
FE-183E |
FE-203E |
Weights |
Operating weight |
18000 |
20000 |
Front axle load |
11500 |
13500 |
|
Compaction characteristics |
Static linear load |
529 |
621 |
Vibration frequency |
28/33 |
28/33 |
|
Nominal amplitude |
1.86/0.93 |
1.86/0.93 |
|
Exciting force |
340/240 |
370/255 |
|
Driving characteristics |
Gear I |
0-5 |
0-5 |
Gear II |
0-6.4 |
0-6.4 |
|
Gear III |
0-10 |
0-10 |
|
Theoretical Gradeability |
55 |
50 |
|
Min turning radius(inner) |
4370 |
4370 |
|
Engine |
Engine model |
SC8D190.1G2 |
SC8D190.1G2 |
Rated power |
140 |
140 |
|
Rated rotated speed |
2200 |
2200 |
|
Dimensions |
Overall dimensions(L X W X H) |
6222X2390X3200 |
6222X2430X3200 |
Detail photos of road roller
Jining, Shandong, China
Send your inquiry to this supplier