16T/D Slurry Ice Machine Commericial For Deep Sea Fishing ,

16T/D Slurry Ice Machine Commericial For Deep Sea Fishing , HAVC And Refrigeration System

Quick Detail:

It is made of 4 sets of SL4T

Capacity: 16000kg/24hrs, pure ice or with the thickness of 100%

Refrigerant: R404A, R22, and so on

Evaporator material: titanium alloy

Compressor: Bitzer

Condenser: Seawater cooling

Power supply: 3P/380V/50HZ, 3P/220V/60HZ, or else

CE approved quality

Description:

Slurry ice is full of suspended ice crystals, with the look of liquid or fluid. This new type of ice has many advantages in comparison with the traditional ice, such as flake ice, shell ice, crush ice ans so on. It can be used in direct contact with the object to be chilled. Due to the perfectly large contacing area, it has the very best cooling performance. Slurry ice can be reused again and again inside one heat exchange system.

Applications:

1. On board use for fishing.

A: Used on small fishing boat.

Small fishing own only one fish storage tank. Snowell slurry ice machine continually make seawater into ice slurry and automatically pump it into the fish storage tank. Water in the fish storage tank is pumped back into the ice machine and become ice slurry. The circle repeat itself again and again, unitl the fish storage tank is full of fish and high concentration ice slurry.

B: Slurry ice machine used in big fishing boat
Snowell slurry ice machine continually make seawater into ice slurry and automatically pump it into one ice slurry storage tank. The concentration of ice slurry is adjustable according to the ice making time. Ice slurry is pumped into fishing tubs for freezing fish. Ice slurry quickly remove the heat from the fish. The melted ice and surplus seawater drain away from the hole on the bottom of fishing tubs and only dry ice crystals remain in the tubs. The remained ice crystals covered the fish 100% and completely keep the fish in -2℃ condition stably for a long time.

2. Slurry ice machine used in fish processing plant

Liquid ice slurry is the best ice for removing the heat from fish. The heat removing speed is about 2 times faster than cold water or traditional ice. It is widely used in fishing processing plant for removing heat from fish, for packing fish into box and so on.

3. Slurry ice machine used in HAVC & Refrigeration system.

Refrigeration in working envionment and cold room

Thermal energy storage

Refrigeration for the mine

Artificial snow and simulative Polar region

Refrigeration of the concrete mold

Specifications:

Slurry ice machine parameter list
Model	Running power	Solid ice	50%	25%	Cooling capacity(kw)	Dimension
	Kw	T/day	T/day	T/day		L*W*H(mm)
SL4T	7.5	4	7	16	21.1	1140*460*1730
SL8T	13.8	8	14	32	42.2	1140*940*1730
SL12T	18.9	12	21	48	63.3	1140*1360*1730
SL16T	27.5	16	28	64	84.4	1140*1840*1730
SL20T	30	20	35	80	105.5	customized
SL30T	37	30	56	115	160	customized
SL40T	56	40	70	160	211	customized
SL60T	85	60	112	230	300	customized
SL80T	110	80	140	320	422	customized
SL120T	170	120	224	480	633	customized
SL160T	220	160	280	640	844	customized
SL200T	300	200	350	800	1055	customized

Competitive Advantage:

1. High latent energery: The slurry ice is binary mixture of water and ice crystals with a high heat interchanging capacity amounting to 80kcal/kg.

2. Low energy cost: The producing of slurry ice is 2 times engery saving than tranditioinal ice making. In adddition, the slurry ice can be stored in thermal storing reservoirs and approved by the heat department for being resued later on. It allows you to produce the slurry ice in the electricity off-peak when the electricity charge is cheaper and use them in the peak time, which can save you the electricity cost.

3. Human energy saving. Slurry ice machine does not need people to shovel and transport the ice the end-use destination. It is pump-able, and a hose can get the job done, which make it a very labor-efficient ice solution.

4. The largest contact surface with the products to be chilled. The heat transfer surface contact between the ice and the product is the largest, and the slurry ice is at sub-zero temperature, which makes the slurry ice fast chill the product to be temperature around 0°C. Once the liquid surplus is drained, the pruduct is left totally surrounded by smooth, round ice and consequently protected from the versatile enviroment.

5. The chilling time drops: It increase the chilling speed up to 200% compared with traditional ice.

6. Extend the fresh time of food. Extend the fresh time of fish, or meat to get enhanced quality and better price. Due to the round shape of the crystals and the absence of sharp edges and the fast cooling of the products, the slurry ice becomes ideal for application directly on the pruduct to be chilled so avoiding any damage to the product, which can improve the qulity and appearance of fish or meat.

7. More hygienic ice quality: The ice is always stored into thermal storage reservoirs and pumped through the pipes so there is no posibility to polluted by air-borne dust or other contaminant deposited on the exposed parts of the tanks and vats.

8. Pump-able: One of the main advantages of this system is its easy distribution. Due to its tiny crystals and pump-ablility, the slurry ice has the property to flow through small tubes and holes, so it can be pumped through rigid and flexible pipes from its generation point up or down to its application point, basically not limited by the destination of the end-user.

9. Lower infrastructure cost: The necessary ancillary equipments for the slurry ice machine is less as it does not need facilities below:
a. Load-bearing facilities of great ice silos.
b. Mechanical system to remove the ice from the silos.
c. Light tanks to transport the ice to final destination.
d. Electic or gasoline trucks.
e. Maintenence of the facilities, especially the moving parts.
f. Conveyor belt for the ice