1 / 6
Model No. : | nylon NN conveyor belt |
---|---|
Brand Name : | Dengren |
Product description
Belt type |
Fabric type |
Single Fabric strength (N/mm) |
Single fabric thickness (mm) |
Rubbercover thickness (mm) |
Ply |
Belt width (mm) |
Belt length (m)/roll | |
Top rubber | Bottom rubber | |||||||
Cotton Canvas (CC) conveyor belt |
CC-56 |
56 |
1.10 |
3.0/4.5/6.0 |
1.5/3.0 |
3-12 |
300-1800 |
100-1000 |
Nylon (NN) conveyor belt | NN100 | 100 | 0.70 | 2-10 | ||||
NN150 | 150 | 0.75 | ||||||
NN200 | 200 | 0.90 | ||||||
NN250 | 250 | 1.15 | ||||||
NN300 | 300 | 1.25 | ||||||
NN400 | 400 | 1.50 | ||||||
Polyester (EP) conveyor belt | EP100 | 100 | 0.75 | 2-10 | ||||
EP150 | 150 | 0.85 |
2-6 | |||||
EP200 | 200 | 1.00 | ||||||
EP250 | 250 | 1.20 | ||||||
EP300 | 300 | 1.35 | ||||||
EP350 | 350 | 1.50 | ||||||
EP400 | 400 | 1.65 |
Item | between the fabric layers | between cover and belt carcass | |||||
cover thickness 0.8-1.5mm | cover thickness>1.5mm | ||||||
average value of all samples,N/mm≥ | 4.5 | 3.2 | 3.5 | ||||
lowest peak value of all samples,N/mm≥ | 3.9 | 2.4 | 2.9 | ||||
Remark:highest peak value of all samples shall not exceed 20N/mm |
grade of covering rubber | Tensile strength, Mpa,≥ | Elongation at break,% ≥ | abrasion loss, mm3≤ | Change rate of tensile strength and elongation at break after 70°Cx168h aging | ||||
laceration resistant type(H) | 24 | 450 | 120 | -25 ~ +25 | ||||
abrasion resistant type(D) | 18 | 400 | 100 | -25 ~ +25 | ||||
ordinary type(L) | 15 | 350 | 200 | -25 ~ +25 |
Send your inquiry to this supplier