100 W 20a 5v Ac - Dc Switching Adapter ,dual Output Power Supplies With Ul60950-1, Emc

SPECIFICATION

MODEL

ESH-100W-5

ESH-100W-7.5

ESH-100W-9

ESH-100W-12

ESH-100W-15

ESH-100W-24

ESH-100W-48

OUTPUT

DC VOLTAGE

5V

7.5V

9V

12V

15V

24V

48V

RATED CURRENT

20A

13.6A

11.2A

8.5A

7A

4.5A

2.3A

CURRENT RANGE

0 ~ 20A

0 ~ 13.6A

0 ~ 11.2A

0 ~ 8.5A

0 ~ 7A

0 ~4.5A

0 ~ 2.3A

RATED POWER

100W

102W

100.8W

102W

105W

108W

110.4W

RIPPLE & NOISE (max.) Note.2

80mVp-p

120mVp-p

120mVp-p

120mVp-p

120mVp-p

120mVp-p

150mVp-p

VOLTAGE ADJ. RANGE

4.100 ~ 5.5V

7.13 ~ 8.3V

8.55 ~ 9.9V

11.4 ~ 13.2V

14.25 ~ 16.5V

22.8 ~ 26.4V

45.6 ~ 52.8V

VOLTAGE TOLERANCE Note.3

+/-2%

+/-1%

+/-1%

+/-1%

+/-1%

+/-1%

+/-1%

LINE REGULATION

+/-0.5%

+/-0.5%

+/-0.5%

+/-0.5%

+/-0.5%

+/-0.5%

+/-0.5%

LOAD REGULATION

+/-0.5%

+/-0.5%

+/-0.5%

+/-0.5%

+/-0.5%

+/-0.5%

+/-0.5%

SETUP, RISE TIME

500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load

HOLD UP TIME

50ms/230VAC 10ms/115VAC at full load

INPUT

VOLTAGE RANGE

85 ~ 132VAC / 176 ~ 264VAC  selected by switch, 248 ~ 373VDC

FREQUENCY RANGE

47-63Hz

EFFICIENCY (Typ.)

80%

100%

81%

81%

83%

84%

100%

100%

86%

86%

AC CURRENT

2A/115VAC   1.2A/230VAC

INRUSH CURRENT (max.)

COLD START 45A

LEAKAGE CURRENT

<2mA / 240VAC

PROTECTION

OVER LOAD

105-150%rated output power

Protection type : Constant current limiting, recovers automatically after fault condition is removed

OVER VOLTAGE

5.100 ~ 6.100V

8.6 ~ 10.1V

10.4 ~ 12.2V

13.8 ~ 16.2V

17.25 ~ 20.25V

27.6 ~ 32.4V

55.2 ~ 64.8V

Protection type :Shut down O/P voltage, re-power on to recover

OVER TEMPERATURE

U1 Tj 140 typically (U1) detect on main control IC

Protection type : Shut down O/P voltage, recovers automatically after temperature goes down

ENVIRONMENT

WORKING TEMP.

-20 ~ +50 (Refer to output load derating curve)

WORKING HUMIDITY

20-90% RH

STORAGETEMP., MIDITY

-20-+85℃, 10-95% RH

TEMP. COEFFICIENT

+/-0.03%/(0-50℃)

VIBRATION

10-50HZ

SAFETY &EMC

SAFETY STANDARDS

UL60950-1approved

WITHSTAND VOLTAGE

I/P-O/P:3KV I/P-FG:1.5KV O/P-FG:0.5KV AC

ISOLATION RESISTANCE

I/P-OP, IP/FG, OP/FG:100M OHMS/500VDC/25C/70%RH

EMICONDUCTION& DIATION

Design refer to EN55022 (CISPR22) Class A

EMS IMMUNITY

Design refer to EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204, EN55024, light industry level, criteria A.

OTHERS

MTBF

320.7Khrs min.   MIL-HDBK-217F(25℃)

DIMENSION

159*97*38mm (L*W*H)

PACKING

0.55Kg; 30pcs/17.5Kg/0.97 CUFT

NOTE

1:All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2:Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3:Tolerance : includes set up tolerance, line regulation and load regulation.

4:Line regulation is measured from low line to high line at rated load.

5:Load regulation is measured from 0% to 100% rated load.

6:The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets

EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.